Soft Stands

Assembly Instructions

Soft Stands can be easily broken down for convenient and compact storage and transport.

Click Here

to open a new window with a printable pdf file that explains assembly of the stand. These are the same directions that are sent with your stand.

BE VERY CAREFUL that whenever you insert or remove the legs, ALWAYS  PUSH  IN and PULL OUT STRAIGHT and without binding.

We suggest that the first few times you assemble your stand to do it on a sturdy, flat surface. After a few times, you should be able to assemble your stand quickly without need for a flat surface.

Insert all four legs into the top rails. (the wood parts that have the cloth attached)

Make sure that the bungee cords are sticking as far out the bottom of the legs as possible, approximately 1 ½ inches.

Slide one of the two wooden feet over the protruding bungee, then push STRAIGHT IN. The cord should pop through the bottom of the leg so you can grab it.

Secure the cord in the slot provided.

Repeat the two previous steps, securing the same wooden foot to the aluminum leg that is attached to the other rail.

 The second wooden foot is then placed over BOTH of the other legs simultaneously. CRITICAL!! Push the second foot straight onto BOTH of the legs at the same time. It must go evenly onto both legs, or damage may result. Secure the bungees as before.

Turn the stand right-side-up, and press straight down firmly to assure all four legs are in all the way in. Adjust the top rails so they are parallel. Your stand is ready to use!

To disassemble the stand, simply reverse the assembly procedure.  To remove the first wooden foot, grasp two of the legs and push it straight up with your thumbs. DO NOT EVER PULL OUT THE FIRST LEG ALONE! The binding force will could break out the wood on the top rail.